Mobile
Log In Sign Up
Home > english-chinese > "functional layer" in Chinese

Chinese translation for "functional layer"

机能层
子宫内膜功能层


Related Translations:
functional lumbago:  功能性腰背痛
functional aphasia:  功能性失语症官能性失语机能性失语
functional method:  单行渐进式建立火灾控制线法
functional blindness:  功能性盲机能性盲
functional product:  功能性产品
functional parallelism:  功能并行性
functional return:  功能报酬
functional corrector:  功能调节器
functional key:  功能键
functional pigment:  功能颜料
Example Sentences:
1.Polyelectrolytes properties of the hydrogel functional layer of a composite nanofiltration membrane
复合纳滤膜凝胶功能层的聚电解质特性
2.You can use struts to help you develop applications that are divided into three functional layers
Struts可用来帮助您开发分为三个功能层的应用程序:
3.You can use jsf to help you develop applications that are divided into three functional layers
您可以使用jsf来帮助您开发分为三个功能层的应用程序:
4.The influence of functional layer upon the performance of the oled is studied ahead the mutually doped transitional layer
我们在研究互掺过渡层之前,研究了功能层对器件影响。
5.Three layers client / server mode is adopted as the application mode of system and embedded discussion is made for the realizing way of functional layer
采用三层c s模式作为系统的应用模式,并对功能层的实现技术进行了较深入的探讨。
6.On the contrary , because the molecular weight of piperazine monomer is far below the molecular weight cut - off range of nanofiltration , it can easily permeate the functional layer into the w / o interface to keep reacting with trimesoyl molecules
目前纺制的复合效果较好的聚矾中空纤维基膜通量高于200lm一h一, ,对peg20 ( ) 00的截留率达99 % 。
7.Based on a cone - shaped compound heatshield , a series of research work has been done from the investigation of theoretical analyses of ablative and insulating principles and technical experiments . 1 based on the exploration of improving material performances , a feasible scheme of adding insulating functional layer is proposed ; 2 a simplified calculation method is proposed via establishing fea ( fmite element analysis ) and instantaneous heat transmission is calculated with the mentioned method ; 3 a practical engineering scheme is proposed through a series of experiments ; 4 the interface problems of the function layer are solved through co - curing method and successful samples are manufactured ; 5 in order to estimate properties , the heatshield was anatomized engineering applied possibility is explored on the analyses of performance evaluation by testing mechanical properties , coefficient of heat conductivity and doing dynamic ablative experiments , also , the comparison with that of the required materials is done
本文以一锥形复合防热套为研究对象,从烧蚀、隔热机理的理论分析和工艺试验两方面,进行了一下研究工作: 1 、通过对提高材料及制品通过对提高材料及制品隔热性能的多种途径进行探讨,提出了采用添加隔热功能层,研究复合型大面积防热套是理论有效、工艺可行的方案; 2 、通过建立有限元分析模型,对防热套的烧蚀隔热行为进行了理论分析,提出了简化的隔热计算方法,并用该方法对复合型防热套的瞬态传热模型进行了分析计算; 3 、通过复合型防热套的工艺探索试验,提出了一种工程应用上切实可行的工艺方案。
8.A quantitative analysis on the surface of the plate composite membranes with various polymerization tune was made on the basis of the feature absorption to ir by means of attenuated total reflection - fourier transform infrared spectroscopy . the results showed that polyamide functional layer grew thick with the polymerization time going on . this indicates that the polyamide functional layer formed on the interface cannot separate the w / o phases to stop the reaction
利用衰减全反射-傅立叶变换红外( ftir - atr )对不同聚合时间的平板复合膜表面进行了特征吸收定量分析,研究发现,聚酰胺功能层随聚合时间不断增厚,这说明已形成的聚酰胺功能层不能屏障两相而终止反应,相反由于哌嗪单体的分子量远低于纳滤截留分子量的范围,很易扩散穿过功能层达到两相界面,继续与有机相单体酰氯反应。
9.The study conducted research on the following four fields : firstly , the characteristics of the interfacial polymerization system of piperazine aqueous solution / trimesoyl hexane solution were systematically investigated . the results show that at a certain molar ratio between the two monomers , piperazine and trimesoyl , at the two phase interface , a dense functional layer of ultra low pressure , high permeating flux and high salt rejection formed by controlling the time of interfacial polymerization , such as the composite membrane ( i ) , the concentration in water phase is 0 . 4 % , and 0 . 1 % in organic phase , and the polymerization time is 1 minute
本文主要进行了四个方面的研究,首先系统分析和研究了哌嗪水溶液均苯三甲酰氯正己烷溶液界面聚合体系特征、界面聚合反应中各影响因素对膜性能的影响等,结果发现,当界面处两相单体(哌嗪和酰氯)分子摩尔比为某一比值时,通过控制界面聚合时间(有机相处理时间) ,可以形成超低压高通量高脱盐的致密功能层,如复合膜( ) ,水相浓度为0 . 4 ,有机相浓度为0 . 1 ,聚合时间1min 。
10.It set up the development of the world recognized high performance nanofiltration composite membrane of aromatic polyamide , on the basis of reviewing the development , the importance in the membrane separation technology , the classification , the fabrication technique and the current development of the research and the application of the nanofiltration membrane . polysulfone was chosen as the material for making the porous substrate because of its excellent compress - to - denseness resistance , its cheap price and its great availability . by fabricating an ultra thin polyamide functional layer on the polysulfone substrate through interfacial polymerization taking piperazine as the monomer in aqueous phase and trimesoyl chloride as the monomer in organic phase , high performance nanofiltration composite membranes of ultra low pressure and ultra high permeating flux were prepared
选择耐压密性能优良,价廉易得的聚砜材料为制备复合膜基膜材料,哌嗪为水相单体,均苯三甲酰氯为有机相单体,通过界面聚合反应在基膜表面形成超薄功能层,制备了超低压高通量聚哌嗪均苯三甲酰胺聚砜纳滤复合膜,以0 . 1 mgso _ 4溶液为测试液,所得高脱盐平板复合膜( )在0 . 4mpa下,脱盐率为96 . 1 ,通量达85 . 2l
Similar Words:
"functional knowledge" Chinese translation, "functional label" Chinese translation, "functional lability" Chinese translation, "functional language" Chinese translation, "functional latency" Chinese translation, "functional layer of endometrium" Chinese translation, "functional layout" Chinese translation, "functional leader" Chinese translation, "functional leadership" Chinese translation, "functional lesion" Chinese translation